Looking for ?

Translate

How to unlock or breakin Huawei B310s-927 4G LTE router

Before i will be able to start: If you're living in Abuja, Onitsha, you'll bring it to us otherwise you roll in the hay your self. Enjoy.
Huawei has launched B310, which is currently available through Airtel carrier in Africa and India. you'll also get Huawei B310 in Indonesia by Bolt and in Saudi Arabia by STC carrier. STC branded B310s-927 comes with hardware version: WL1B310TM and firmware / software version: 21.316.01.00.1304. I even have personally tested unlocking of B310 Airtel, Spectranet it's same for other countries routers too, if the device is posing for unlock code, don't border changing the firmware.
If Huawei B310 device isn't posing for unlock code then you've got to vary the firmware

 

RELATED POST: 

Download B310sUsbloader, Balong USB Downloader, And USBlsafe For E5573bs 

Best At^ Command For solving power light problem for B310s-927 4G LTE router 

Download Huawei b310s 925 Update_21.311.05.00.1353_Firmware 

 

FIRMWARES:

NOTE: Installing Universal Firmware can help you to be able to create APN in your Datchboard 196.168.0.1 . and also allow you to change to any webUi to avoid Stucking your device at Power led(White power light).

Download Firmware Huawei B310s-927 Update 21.311.03.01.1228 (Oman) Free 

Download Huawei B310s-927 Firmware Update 21.300.01.00.00 (Universal) 

Download Firmware Huawei B310s-22 Update 21.311.03.00.00 (Universal) Free 

Download Firmware Huawei B310s-22 & B315s-22 Update 21.311.03.00.264 (P4 Poland) 


Download Firmware Huawei B310As-852 21.270.99.01.00 Universal 

Download Firmware Huawei B310s-22 Update 21.300.07.00.00 Universal 

WEBUIs:

Note: If you wish to change the WebUi, you have to change your custom firmware to universal first. If you didn't  and try to install webui, your device will stuck at power led. and at this stage, you have to meet me or any professional around you to bring the device back to life.

WOW: Even if you didn't change Firmware + WebUi to be able to have Option for Creating new APNs, don't worry. after unlocking your device, i  have a way out how to create new APNs with ease.

Download Huawei E3372H WebUI with USSD support 17.100.11.00.03 

Download Huawei E5377 WebUI 17.100.09.00.03 General

Download Huawei E3372h Update WEBUI 17.100.09.00.03 Hilink Universal


NOW LETS UNLOCK YOUR DEVICE:

Don't fear, since i could get it done my self, you can do it because i don't have two heads.

The procedure is risky and any mistake make your device dead, so be careful while unlocking.

Arrange one USB 2.0 cable; if not then you can also use cut wire of mouse or keyboard. Dismantle the Huawei B310s-927 and soldier wires as shown in below image. Solder the cables of opposite side of USB 2.0 port to the motherboard of the device.
For more news, relationship, Tech updates etc. Click here to download our Android App

Note : Don’t make any mistake. Use the corresponding cable to solder with the board as shown in above image.

If you have successfully done above steps then you are now ready for proceeding with next step.

How to unlock Huawei B310s-927 4G LTE router?

1:Connect to PC with USB cable.

2: Download DC unlocker.

3:Download Huawei Mobile Partner with below links

 

   i:Download Huawei Mobile Partner 23.015.02.00.03 for Windows 8.1 OS


    ii:Download Huawei Mobile Partner V200R003B015D11SP00C983 for Mac 10.10

   iii: Download HUAWEI Stick UTPS-V200R003B015D11SP01C983 (for win10 and 8/7)  

4. Install Huawei mobile partner in Windows PC. 

5. Now run DC unlocker and detect B310s-927 under it.

6. At the end of the result, paste the following command :
AT^NVRDEX=50503,0,128
7. Press enter from keyboard.



 

 8. Now, it will show NV codes in hash format.

Pay $5 into our Perfect money(PM) account number :U7801411 or in our Payoneer account number: 00003014074094164

Copy all the hash code in a notepad and send to our mail (contactwakabia@gmail.com) with your full name of your account.

we will use the hash code to get your  the working unlock code.  It will be send back to you as a reply under your message which you sent to us.

warning: If you generate your own code from any where for free, don't blame me or my guild, because i gave a perfect tutorial that am using at the moment. Thank you.


SHARE THIS POST

About Wakabia

    Blogger Comment
    Facebook Comment

77 comments:

  1. Mr. Udoka i need your help. HUAWEI MODEL: B310s-927, S/N:F5S7S15717042184, IMEI: 866175026769391

    I will so much appreciate if you help me out with the unlock code. God bless your handwork. Will be waiting to hear from you

    ReplyDelete
    Replies
    1. Please follow the above steps carefully. when you get to step 6, Run that code in DC Unlock, then send the hatch code to my mail, make the payment and wait for the unlock code. But if you live in Abuja, Onitsha, you can bring your device to my office.

      Delete
    2. Hello. please i have forwarded the harch code in your email. and have paid through mobile banking. can you now help me with Unlock code. Please don't disappoint me i beg.

      Delete
    3. This is your Unlock code 70468594. and please don't mention any disappointment here, because we are not playing and am not here to deceive any one.

      Delete
    4. Thank you so mcuh. finally i can use All network on my router. God bless you for me.

      Delete
  2. Please i saw you advert from Nairaland and am not living in Abuja nor Onitsha. but i wish to unlock my E5573s-xxx Router. am seriously in need of it because the guy i gave it to that claimed that he knew it wasted like 2days without any good result.

    ReplyDelete
  3. John Ezeh please this place is for B310s-xxx. please click this link and make your request there, with your device information. Since you are not close to me, just follow the steps in the above link, then send me your generated hatch code and wait for unlock code. on How to unlock Huawei B310s-927 4G LTE router

    ReplyDelete
  4. Please i have SMILE MIFI, can you help me.

    ReplyDelete
    Replies
    1. No solution for SMILE for now. Will post a solution on that if our team figured it out.

      Delete
  5. I FOLLOWED YOUR STEPS BUT MY COMPUTER DOESN'T RECOGNISE THE USB DEVICE, MY B310-927 FIRMWARE 211.311.05.01.1158

    ReplyDelete
    Replies
    1. First make sure that you did the soldering well. two i will like to know the windows(10,8,8.1/7) you are using. because when you don't have the needed Driver installed, your computer wouldn't detect your device.

      Delete
    2. i am using window 8 pro, and the soldering was perfectly done by a professional

      Delete
  6. NOTE: Any time you needed any thing or want to ask me a question and am not active at the moment, just drop your question here and let me know by calling me on 07063076212. because i might be busy with other things.

    ReplyDelete
  7. i am using window 8 pro, and the soldering was done perfectly well by a professional.

    ReplyDelete
    Replies
    1. So sorry for late reply. i was at sleep. please you need mobile partner(USB Driver or Stick). Download it and install it from above step 3(iii).

      Delete
    2. i already did, and it still says usb not recognised

      Delete
    3. Am Using Windows8 Pro too. and that mobile partner is what made my device to be recognized by my PC. check your mail for i picture of version of my Mobile partner, if it is the same version to yours.

      Delete
    4. i didn't see any picture from you on my mail box

      Delete
    5. The version am using for win 8 is the same as you are seeing it above. May be it has recognized it but you didn't know. please try and connect your device after installing the Mobile partner. Run the DC Unlocker as Administrator and Detect your device.

      NOTE: You must Run DC Unlocker as Administrator.

      Delete
    6. thats exactly the version am using, but am suspecting is from the firmware version of the router, my firmware is 211.211.05.01.1158, someone suggested that boot shot method but i dont know how to do it.

      Delete
    7. I adviced to do boot shot on Routers E5573 or so. Make sure that your USB cord is a working one. else you will be facing the same issue you are facing now. if you are using a working cord which you cut by your self and it still not working. Try installing Universal firmware or downgrade it.

      Delete
    8. Just click on this link, read the steps on how to update to universal firmware. that will be ok.

      Delete
  8. Please use better live working USB cord. Because mine didn't have this issue. and there is no much different in your version and mine.

    ReplyDelete
  9. Try other Huawei USB Drivers.uninstall the installed once first.

    ReplyDelete
  10. From my knowledge so far, i believe that boot shot is the same of been in USB mode in B310s. if any one knows better, let him explain.

    ReplyDelete
  11. Oga UD. you have already advertised your good work in your blog. Anyways, thanks for helping me in unlocking my own Spectranet. i never knew it can be unlocked, until i was introduced to you. now am rocking Ntel in my company. God bless you.

    ReplyDelete
  12. without opening your b310s-927 router we can unlock it in 20 second to use any sim network glo,mtn,etisalat , ntel etc contact us on 08097188932 or 08060409751
    sahara bridge

    ReplyDelete
    Replies
    1. Do you think it can work like that, or is this a way you want to get customers quick, by lying to them. Well any which way, good luck.

      Delete
    2. ANONYMOUS How can you say that b320s-927 can be unlocked without following the steps above. Am not a Nigerian, but i always read xseduct articles. to click by and saw what you posted under here. please be truthful to people so that God will bless your handwork. No body can unlock B310 without opening the device, and it is only an expert can do so. please be frank here so that you wouldn't confuse some learners. Thank you all.

      Delete
    3. It's not a lie, It's true...I can beat the 20 secs to 15 secs.


      We call it Softwork :D

      Delete
    4. Well my method is working for me. But if you are sure of your method. you can drop the link here for xsedites to get the software.

      Delete
  13. use this method its free :
    "http://sat213.net/vb/showthread.php?s=af00bc117a9676a464a14e3fd0dd9dd9&t=1403"

    ReplyDelete
  14. hello udoka, pls iwould like to know what to do to my router? i have unlocked it and i have also started rocking my ntel on it and suddenly it stopped working. when powered on, its not showing any signal bu t other indicators are showing irrespective of the sim i inserted. pls whats the way forward?

    ReplyDelete
    Replies
    1. Please reply me with the following 1:Did you disable auto update from your WEB-UI after you finished unlocking the router? 2: Did the router mistakenly fall off from your hand?

      For the first question, it is advisable to disable auto update after unlocking, because when you allow the router to fetch the new update automatically, your router will be locked forever. Though it might not be the cause of your problem, but i demanded to know that first.

      Delete
  15. Hii,
    I tried to update webui. And it got failed router got restart. Know problem is its not opening its default home page. No wifi also I update with different webui it downloading successful but its still stuck with power led.

    ReplyDelete
    Replies
    1. I had the same issue far back. What happened is that you installed custom WebUi when you haven't Installed Universal Firmware. So Download Universal Firmware(Download Huawei B310s-927 Firmware Update 21.300.01.00.00 (Universal)) from above tutorial. Install it in the router. Once done, you can install any Matching WebUi. If you did it correctly The GodMod Light will start off. Good Luck.

      Delete
    2. i have a similar problem with my B310s-927 but the firmware version is 21.311.03.01.1158
      what firmware version can i use to bring it back to life and how many minutes to i need to wait for the upgrade tool to finish the upgrade?

      Delete
    3. Download this version(B310s-927 Firmware Update 21.300.01.00.00(Universal) )from the above post. You can stop the Update once you see a GodMod Light(Blue light). Enjoy.

      Delete
  16. moi toujours reste coincé avec LED de puissance.

    ReplyDelete
  17. same problème only power led

    ReplyDelete
    Replies
    1. Try this at command.

      Just scan with DC Unlocker, and issue this command

      at^sfm=0 and press enter

      if the response is Okay

      then type this again

      at^reset and press enter

      It would come back to light.

      Delete
  18. hey my divice not recognized on pc?

    ReplyDelete
    Replies
    1. What is the Firmware version of your router and The Operating system your system has?

      Delete
  19. Hi,I have a B310s-925 Router How Can i unlock it... can i use this same method to unlock my router.

    ReplyDelete
    Replies
    1. I haven't tried using my method on B310s-925 Router, but when ever i do so and confirmed that it is 100% working, i will post it for you guys or let you guys know. Just keep in touch. But if any xsedite tech has tried such, you can help others by dropping the guild for them. thank you.

      Delete
  20. First create a backup and mail me this file. Afterwards I will tell.

    ReplyDelete
  21. b310s-927 firmware 21.316.01.00.1304
    i think stc has blocked the usb ports in firmware, its not recognised by dc unlocker any more. can you help in this regard. thanks

    ReplyDelete
  22. Mine is too not recognized by dc unlocker

    ReplyDelete
  23. Most of you guys that I helped in unlocking their device(old firmware precisely), please try and disable auto update from your settings in Web UI. Once your device updates to latest firmware. Your device might be locked forever. Or it would lead to USB port non recognized by you PC. Please take note. Latest firmwares can be unlocked,but don't force it if you can't do it yourself. Drop your questions,or take your device to any close tech guy that knows it well. I love you guys.

    ReplyDelete
  24. Hay man im using a huawei B310S-925 and i want to unlock it. If send you imei can you give me a unlocking code. And how much i have to pay for you. Really appriciate it. Help me out man.

    ReplyDelete
  25. We can help you with the working unlock code, if you can follow the above steps in other to generate Hash code. once you could be able to generate the hash code. send it to our mail(info.xseduct@gmail.com) or WhatsApp number (07063076212).
    you pay N2000 for the working unlock code. use the bank detail above or our perfect money account number above to make your payment. let us know once you are done. then you get your unlock code instantly. thank you.

    ReplyDelete
  26. every time i try to download it tells me the requested resource is in use

    ReplyDelete
  27. how to update my firmware ? i have STC B310s-927

    ReplyDelete
    Replies
    1. http://www.wakabia.com/2016/09/best-steps-how-to-flash-firmware-on.html

      Delete
    2. can i add you at facebook? i need someone to teach me, i already do this way :(

      Delete
    3. also i want to ask how to reset unlock counter for this modem ?

      Delete
  28. Hello. I have a this router( b310-927) It Supported LTE 1800mhz after unlockig .i am from Sri lanka

    ReplyDelete
  29. Replies
    1. Do you have issues with the unlock, what kind of error are you getting?

      Delete
  30. B310-927 successfully unlocked using jio for last 6 months now the modem is not responding the reset has no result. connected usb to the usb pins and detects as 3gapplicationinterface(com6) and 3gpcUIinterface (com4). webgui update happens successfully. Lan connects but no dhcp . tired resetting from reset switch nothing works. normal boot white light only and after 10 minutes red and signal last two bars. still it shows (3gapplicationinterface(com6) and 3gpcUIinterface ) . dcunlocker hangs nor says no modem found. multi lan tool does nothing when give a bin for flash.
    Now I did boot short and put in b310 usbloader.bin then a firmware from B315s-936_Zain using gohdlc then Huawei_Flasher_v2.exe to flash this in the end it is successful now I have usb unknown device and if I boot with power and wps then it goes into com(serialportmode) lan detecs but no dhcp so don't know that ip. still only white light ..
    anyone has any idea??

    ReplyDelete
    Replies
    1. ok Now if you leave it for sometime like about more than a minute you see white light then red light and last two leds of the signal bar

      Delete
    2. Leaving your router to update its firmware automatically is the deadly mistake you made at the first. We have said it before that the Huawei company and other company that build Routers are not in support of the unlocking. So you should have disabled auto update from your WEB-UI after unlocking it then. Because now you can not unlock it again with few methods you can find on net.

      Delete
    3. please send the light signal to contactwakabia@gmail.com

      Delete
  31. Can u provide links for universal firmware and universal web ui for b310s 925 model

    ReplyDelete
    Replies
    1. Here is it https://routerunlock.com/?wpfb_dl=1358 Note: All the WebUI of the E5573, E5577, E3372 etc are supported.

      Delete
    2. Yah.but u have told that the universal firmware should install before installing universal web ui.i couldnt find any universal firmware for b310s 925.there is "b310s 925 genaral firmware ".is it the universal firware for the model??

      Delete
  32. Device name: B310s-927
    Hardware version:WL1B310TM
    Software version:21.316.01.00.306
    Web UI version: 17.100.09.00.03

    When i run AT^NVRDEX=50503,0,128 command i get error instead of HASHES. Guide Please.

    ReplyDelete
    Replies
    1. You have to be sure that your DC-Unlocker has detected your device before running it. If it still not work. Download Teamviewer let me guild you.

      Delete
    2. I am not using DC-Unlocker. Got a guide on YouTube narrating a method to get Hashes without soldering USB. All went well except the AT command part. Link to that video is https://www.youtube.com/watch?v=jV5mplSSQ0w&t=93s

      If this is wrong then i will get it soldiered and give you access. Can you please give me software links for windows 10 x64. I mean driver, utilities required etc.

      Delete
    3. Go up on this post and Download ii: Download HUAWEI Stick UTPS-V200R003B015D11SP01C983 (For Win10 And 8/7).

      For the video you sent, seriously we have not tried or unlock without soldering. So i can't tell you anything about that. Until we did with that method and it works, then we publish.

      Delete
    4. But that video seems cool, why not you try it again. then as you are doing it, look well and make sure you didn't miss any step or any character in those codes.

      Delete
    5. Spent almost 3 hours . . tried every thing . . as this device contains customized FW version so i thing such commands are blocked some way. Can you give it a try if you have any unlocked device with you.

      Delete
    6. I doubt that if this is the case that some AT commands are blocked at firmware level then i suspect that it wont work with DC-Unlocker too as that use the same command.

      Delete
    7. It might be true, just that we haven't unlocked any router past 2 months now. we are busy with some new idea in Tech. E.g http://www.wakabia.com/2017/08/best-method-to-crack-hotspot-shield.html 100% working for all versions.

      Delete